Complete range of industrial pH sensors, ORP electrodes, pH transmitters, online pH/ORP analyzers and process instruments — for water treatment, pharmaceutical, food & beverage, chemical and general process industries across Tamil Nadu and pan India.
Instruments & Controllers
Wall-mounted online pH and ORP measurement instruments with control, data logging and Modbus RTU communication — for continuous process monitoring and dosing control.
The Neon® pR is a leading-edge single-channel pH and ORP measurement and control instrument. Expandable through software upgrades and add-on modules — analogue outputs, concentration-based or volume-based dosing control, Modbus RTU interface and data logger. Touch screen version available. SD card settings duplication for multiple installations.
| pH Range | –2.00 to +16.00 pH |
| ORP Range | –1500 to +1500 mV |
| Temperature Input | –30 to +140°C (Pt100/Pt1000) |
| Temperature Compensation | Automatic (linear, pH) |
| Analogue Output | 2× 0/4–20mA, galvanically isolated, max 500 Ω |
| Alarm Relay | 1× N/O contact, 250V / 6A / 550VA |
| Serial Interface | RS485 Modbus RTU (optional) — 19200 bps |
| Power Supply | 85–265V AC / Option: 24V DC |
| Power Consumption | 10 VA |
| Protection Class | IP65 (wall-mounted) |
| Operating Temperature | 0 to +50°C |
| Storage Media | SD card up to 1 GB (data logging) |
Also searched as: online pH transmitter Tamil Nadu, pH controller 4-20mA Modbus India, wall mount pH analyzer supplier Tamil Nadu, pH ORP online monitor dealer India
The Krypton® pR Flow is a complete wall-mounted flow-through pH and ORP monitoring and dosing system. Houses the instrument, sensor assembly and all connections in one enclosure. Includes on/off, P/PI/PID and 3-point controllers with pulse-pause, pulse-frequency or continuous dosing output. Optional volume-based dosing by flow measurement. Made in Germany.
| pH Range | –2.00 to +16.00 pH |
| ORP Range | –1500 to +1500 mV |
| Temperature Input | –30 to +140°C |
| Control Modes | On/off, P/PI/PID, 3-point controller |
| Dosing Relays | 2× N/O contact, 250V / 6A / 550VA |
| Alarm Relay | 1× N/O contact (insertable) |
| Analogue Output | Optional: 2× 0/4–20mA, galvanically isolated |
| Max Process Pressure | 6 bar at 20°C |
| Serial Interface | Optional RS485 Modbus RTU |
| Power Supply | 85–265V AC; Option: 24V DC |
| Protection Class | IP65 (wall-mounted) |
| Dimensions | 400 × 500 mm |
Also searched as: online pH dosing system Tamil Nadu, pH PID controller flow-through analyzer India, complete pH ORP monitoring system supplier Tamil Nadu, pH analyzer with dosing pump control India
pH Sensors & Electrodes
The Zirkon® pH sensor series offers high-quality pH electrodes with zircon junction technology, AH glass measuring element and Tepox gel electrolyte for low maintenance and long service life. Made in Germany. Available for universal, process, high-temperature and pure water applications.

General-purpose industrial pH electrode for use in industrial water, process water, cooling water and wastewater treatment. High-performance AH glass with low alkaline error. Zircon junction 1mm with low-maintenance Tepox gel electrolyte. Cartridge reference system for stable measurement across temperature fluctuations. Made in Germany.
| Measuring Range | pH 0 to 14 |
| Process Temperature | –5 to +70°C (23 to 158°F) |
| Max. Pressure | PG-plug: <2 bar at 20°C |
| Min. Conductivity | >150 µS/cm |
| Junction | Zircon 1mm |
| Electrolyte | Tepox gel 3mol KCl (low maintenance) |
| Electrode Material | AH Glass ball |
| Reference System | Ag/AgCl, Tepox gel 3mol KCl |
| Shaft Material | Glass / Resin (plastic) |
| Shaft Length | 120mm, 160mm, 225mm |
| Process Connection | S8-plug (PG13.5 swivel), S7-plug, Variopin |
| Electrical Connection | 2-pole or 8-pole |
| Temperature Sensor | None / Pt100 / Pt1000 (optional) |
Also searched as: pH electrode supplier Tamil Nadu, industrial pH sensor dealer India, zircon junction pH electrode supplier Tamil Nadu, pH electrode gel filling dealer India, Kuntze Zirkon pH sensor Tamil Nadu

Designed for demanding process and wastewater applications requiring higher pressure tolerance and dirt-resistant junctions. Available with Platinum, PTFE, hole or Zircon junctions — each offering different dirt resistance and salt output characteristics. Gel or solid electrolyte options. Made in Germany.
| Measuring Range | pH 0 to 14 |
| Process Temperature | –5 to +70°C (23 to 158°F) |
| Max. Pressure | PG-plug: <10 bar at 20°C; PTFE: <10 bar |
| Min. Conductivity | >150 µS/cm |
| Junction Options | Platinum / PTFE / Hole / Zircon 1mm |
| Electrolyte | Tepox gel 3mol KCl / Solid electrolyte / 3mol KCl liquid |
| Electrode Material | AH Glass |
| Shaft Material | Glass |
| Shaft Length | 120mm, 160mm, 220mm (double chamber), 225mm |
| Process Connection | S8-plug, S7-plug, Variopin (PG13.5 swivel) |
| Electrical Connection | 2-pole or 8-pole |
| Temperature Sensor | None / Pt100 / Pt1000 (optional) |
Also searched as: process pH sensor dealer Tamil Nadu, PTFE junction pH electrode supplier India, pH sensor ETP wastewater Tamil Nadu, process pH electrode 10 bar supplier India, platinum junction pH sensor Tamil Nadu

Specialist pH sensor for high-temperature processes and sterilisable applications (CIP/SIP). Withstands permanent process temperatures up to 135°C. Solid electrolyte for no leakage risk in pressure applications. PTFE or Zircon junction options. Ideal for food & beverage CIP, pharmaceutical SIP processes and high-temperature industrial water circuits. Made in Germany.
| Measuring Range | pH 0.00 to 14.00 |
| Max. Process Temperature | –5 to +135°C (23 to 275°F) |
| Max. Pressure (PG-plug) | <10 bar at 20°C |
| Max. Pressure (PTFE) | <10 bar at 20°C |
| Max. Pressure (Zircon) | <2 bar at 20°C |
| Min. Conductivity | >150 µS/cm |
| Junction Options | PTFE / Zircon 1mm |
| Electrolyte | Solid electrolyte (no leakage) |
| Electrode Material | AH Glass (high-temp grade) |
| Process Connection | S8-plug (PG13.5 swivel), Variopin |
| Electrical Connection | 2-pole or 8-pole |
| Temperature Sensor | None / Pt100 / Pt1000 (optional) |
Also searched as: high temperature pH sensor 135°C Tamil Nadu, sterilisable pH electrode supplier India, CIP SIP pH sensor dealer Tamil Nadu, pH sensor pharma food beverage India, autoclave pH electrode supplier Tamil Nadu, high temp pH electrode 135 degree dealer India

Specially designed for pH measurement in ion-poor and ultra-pure water media where standard pH sensors give unstable readings. Uses 3× Zircon junctions or glass sleeve junction to minimise salt output into the sample. Liquid 3mol KCl electrolyte (refillable). Glass shaft construction. Cartridge reference system for stability in temperature fluctuations.
| Measuring Range | pH 0 to 14 |
| Process Temperature | –5 to +70°C (23 to 158°F) |
| Min. Conductivity | 3× Zircon: >50 µS/cm; Glass sleeve: >20 µS/cm |
| Junction Options | 3× Zircon 1mm / Glass sleeve |
| Electrolyte | 3mol KCl liquid (refillable) |
| Electrode Material | AH Glass |
| Shaft Material | Glass |
| Shaft Length | 120mm, 160mm, 225mm |
| Process Connection | S8-plug, S7-plug, Variopin, fixed cable |
Also searched as: pH sensor ultra pure water Tamil Nadu, WFI pH electrode supplier India, low conductivity pH sensor dealer Tamil Nadu, DM water pH sensor supplier India, ion poor water pH electrode Tamil Nadu

Rugged wide-body pH sensor designed for the most demanding industrial applications — flotation, leaching, neutralisation and outlet monitoring. Annular PTFE junction and Ryton® shaft resist tough chemical environments. 150mm shaft with protective guard against electrode damage. ¾" NPT top and bottom connection for easy installation. Optional solution ground for noise-free measurement.
| Measuring Range | pH 0 to 14 |
| Process Temperature | –5 to +100°C (23 to 212°F) |
| Max. Pressure | <10 bar at 20°C |
| Min. Conductivity | 50 µS/cm |
| Junction | PTFE (annular, designed for tough applications) |
| Electrolyte | Ag/AgCl / Solid electrolyte |
| Electrode Material | AH Glass (half dome) |
| Shaft Material | Ryton® (chemical-resistant) |
| Shaft Diameter | Hexagon 26mm |
| Shaft Length | 150mm with protective guard |
| Process Connection | ¾" NPT (top and bottom) |
| Electrical Connection | S8 (2-pole), Variopin (8-pole), Fixed cable with BNC |
| Temperature Sensor | Pt100 / Pt1000 / NTC 30kΩ (optional) |
| Solution Ground | Optional (built-in) |
| Immersion Depth | 25mm |
Also searched as: heavy duty pH sensor supplier Tamil Nadu, wide body pH electrode India, pH sensor flotation leaching dealer Tamil Nadu, Ryton pH electrode supplier India, NPT pH sensor process industries Tamil Nadu
Why Zirkon® pH Sensors
1mm Zircon junction provides excellent chemical resistance, reduced contamination risk and long sensor life — even in demanding process and wastewater applications.
Patented Tepox gel electrolyte eliminates frequent refilling. Long-lasting gel ensures stable reference potential and reduces maintenance intervals significantly.
Process HT series handles permanent temperatures up to 135°C — suitable for CIP/SIP sterilisation in food, beverage and pharmaceutical manufacturing.
All Zirkon® sensors are manufactured in Germany to the highest quality standards — ensuring consistent measurement accuracy and long service life in industrial use.
ORP / Redox Sensors
ORP (Oxidation-Reduction Potential) and Redox sensors for measuring oxidising and reducing potential in industrial water, drinking water, cooling water and wastewater treatment. Available in gold and platinum electrode materials.
Universal ORP and Redox sensor for measurement in almost any aqueous medium. Low-maintenance gel electrolyte. Available with gold plate, gold ring, platinum ring or platinum plate electrode for different ORP ranges and applications. Zircon 1mm junction. Multiple connection options.
| Measuring Range | –1500 to +1500 mV |
| Process Temperature | –5 to +70°C (23 to 158°F) |
| Max. Pressure | PG-plug: <2 bar at 20°C |
| Electrode Options | Gold plate / Gold ring / Platinum ring / Platinum plate |
| Junction | Zircon 1mm |
| Electrolyte | Tepox gel 3mol KCl |
| Reference System | Ag/AgCl, Tepox gel 3mol KCl |
| Shaft Material | Glass |
| Shaft Length | 120mm, 160mm |
| Process Connection | S8-plug (PG13.5 swivel), S7-plug, fixed cable |
| Electrical Connection | 2-pole |
Also searched as: ORP sensor supplier Tamil Nadu, Redox electrode dealer India, ORP sensor gold platinum electrode Tamil Nadu, Redox potential sensor supplier Coimbatore, ORP electrode water treatment Tamil Nadu, ORP sensor 1500mV dealer India
Process-grade ORP and Redox sensor for higher-pressure industrial applications. Same reliable Zirkon® Rx measurement technology as the Universal series but with robust process connections for demanding environments. Suitable for industrial water circuits, cooling water treatment and chemical dosing monitoring.
| Measuring Range | –1500 to +1500 mV |
| Process Temperature | –5 to +70°C |
| Max. Pressure | Up to 10 bar (PG-plug) |
| Electrode Options | Gold plate / Platinum ring |
| Junction | Platinum / PTFE / Zircon 1mm |
| Electrolyte | Tepox gel / Solid electrolyte |
| Shaft Length | 120mm, 160mm, 225mm |
| Process Connection | S8-plug, S7-plug, Variopin (PG13.5 swivel) |
| Temperature Sensor | None / Pt100 / Pt1000 (optional) |
Also searched as: process ORP sensor Tamil Nadu, high pressure Redox sensor dealer India, ORP sensor cooling water treatment Tamil Nadu, Redox sensor industrial water supplier India
Wide-body ORP/Redox sensor for the most demanding industrial applications — same rugged Ryton® body and ¾" NPT connections as the pH Wide Body. PTFE annular junction. Optional solution ground for stable measurement in high-noise industrial environments. Protective guard included.
| Measuring Range | –1500 to +1500 mV |
| Process Temperature | –5 to +100°C |
| Max. Pressure | <10 bar at 20°C |
| Junction | PTFE (annular) |
| Shaft Material | Ryton® (chemical resistant) |
| Shaft Length | 150mm with protective guard |
| Process Connection | ¾" NPT |
| Electrical Connection | S8 (2-pole), Variopin, Fixed cable |
| Solution Ground | Optional |
Also searched as: heavy duty ORP sensor Tamil Nadu, wide body Redox sensor supplier India, ORP sensor flotation Tamil Nadu, Ryton ORP electrode dealer India
Applications
pH and ORP measurement is critical across a wide range of industries. We help you select the right sensor type, junction material and instrument for your specific application and process conditions.
pH monitoring and control for effluent treatment, neutralisation, coagulation and chemical dosing. ORP sensors for disinfection chlorine dosing control.
WFI pH monitoring, buffer preparation, CIP/SIP process pH. High-temperature and sterilisable sensors for autoclave and SIP-compatible installations.
CIP process pH monitoring, fermentation pH control, product pH verification. High-temperature pH sensors for pasteurisation and sterilisation processes.
Continuous pH and ORP monitoring of cooling tower circuits, chilled water systems and heat exchanger inlet/outlet for corrosion and scale prevention.
Process pH measurement in chemical reactors, neutralisation tanks, acid/alkali dosing systems. High-pressure and aggressive media require PTFE or platinum junctions.
Boiler feed water pH monitoring, condensate pH, cooling water pH and ORP, demineralised water (DM) quality monitoring for power plant water chemistry.
pH measurement in flotation circuits, leaching tanks and neutralisation ponds. Requires rugged, wide-body sensors resistant to abrasive slurries.
Continuous pH and ORP (chlorine dosing) monitoring for commercial pool water quality. Automated dosing control using Krypton® pR Flow system.
In-line or submersion pH and ORP measurement for general industrial water circuits, rinse water pH, scrubber water pH and process quality monitoring.
Tell us your process — medium, temperature, pressure, pipe size and application — and we'll recommend the right sensor, junction and instrument.